12 mm x 32 mm x 14 mm SKF 2201 E-2RS1TN9 Self Aligning Ball Bearings

Fatigue load limit Pu:28.5 kN; Da max.:110.5 mm; Reference speed:4300 r/min; Dimension series:2FD; D:120 mm; da max.:68 mm; ra max.:2.5 mm; Ca min.:5 mm; rb max.:2 mm; C:35 mm;

Grease:7 900 min-1; Static (Cor):24.170 kN; Weight:0.625 kg; Dynamic (Cr):40.760 kN; D:90 mm; B:23 mm; Oil:9 400 min-1; ra:1.5 max; rs:1.5 mm; Pu:1.099 kN;

Material constant KM:330; Basic static load rating C0:2650 kN; α:6 °; Lubricant:Regular relubricatio; rb max.:1 mm; r2 min.:1 mm; d:101.6 mm; C:76.2 mm; Specific dynamic load factor K:100 N/mm²; Design (sliding contact surface combination):Steel/steel;

l5 ≈:45 mm; Mass rod end:15 kg; d:80 mm; l4 max.:324 mm; h1:230 mm; r1 min.:1 mm; dk:105 mm; Basic dynamic load rating C:400 kN; Specific dynamic load factor K:100 N/mm²; α:5 °;

Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; Basic Dynamic Radial Load Rating C:36400 N; D:85.0000 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; B:30.16 mm; Accessories:Metal Shields; Basic Static Radial Load Rating Co:22800 N; d:45.000

b1:9.4 mm; Reference speed:700 r/min; d1 ≈:330 mm; D:380 mm; K:5 mm; d:300 mm; Da max.:370 mm; r1,2 min.:2.1 mm; Basic static load rating C0:2120 kN; Calculation factor kr:0.2;

Mass inner ring:0.0057 kg; B:12 mm; d:12 mm; F:15 mm; r, r1,2 min.:0.3 mm;

Radial shaft seal with a low cross-sectional height, single lip:G 10x14x3; C:10 mm; r min.:0.4 mm; Basic dynamic load rating C:6.82 kN; Inner ring LR series:LR 7x10x10.5; Mass bearing:0.0046 kg; Reference speed:14000 r/min; Limiting speed:18000 r/min; Fatigue load limit Pu:1.27 kN; D:14 mm;

B:49.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; d:105.000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:232000 N; D:225.0000 mm; Basic Dynamic Radial Load Rating C:205000 N; Oil Speed Rating Open/Shielded n2:2900 rpm;

Oil Speed Rating Open/Shielded n2:29000 rpm; Fillet Radius ra:0.51 mm; Basic Dynamic Radial Load Rating C:5200 N; B:9.00 mm; Basic Static Radial Load Rating Co:2450 N; d:10.000 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; D:32.0000 mm;

J1:57.15 mm; End plug (suffix Y):EPR 11; h:47.625 mm; Da:190 mm; Bearing limiting speed:3600 r/min; H:230.981 mm; ba:52.388 mm; PG:1/8 NPT; A1:111.125 mm; Bearing:22318 EK;

Lock nut:AN 30; Taconite seal (dc shaft position):TER 134; PG:1/4 NPT; J max.:463.55 mm; P150°:136 kN; Lock washer:W 30; Initial grease fill:623.7 g; H2:63.5 mm; J1:95.25 mm; Cap bolt, SAE grade:8;

E:mm; Pu:52.140 kN; F:121 mm; s:7 mm; d2:100 mm; Static (Coa):473 kN; b1:mm; d2 (max):mm; Dynamic (Ca):304 kN; D:180 mm;

A:15 mm; G1:55 mm; G:Tr 950x8; G2:G 1/4; d:900 mm; Nut for removal:HM 31/950; B1:430 mm; Hydraulic nut:HMV 190 E; d1:850 mm; B2:475 mm;

Shielded or Sealed B1:12.7 mm; d:25.400 mm; Grease Speed Rating Open/Shielded n1:13000 rpm; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.79 mm; Basic Dynamic Radial Load Rating C:10100 N; D:50.8000 mm; Sealed Speed Rating n3:9000 rpm; Width Plain B:9.5 mm; Accessories:One Shield;